Used for multi-storeyed movement of cars & two wheelers by automobile show rooms, multi-level parking facilities, rooftop parking, etc.
The main advantage offered by us is the ability to carry vehicles with the least amount of power. Also, we being leaders in this type of lifts, a wide range of lifts is on offer to suit every requirement and pocket. The basic design is a drum wound lift with an open chequered plate platform. Better efficiency is achieved by the use of a traction machine. The platform can be covered by very elegant sheet metal panels painted to your shade of choice. If people too are required to travel in the lift, special devices are used to make the lifts safer and smooth. Even the gates can be made automatic if so desired.
These lifts can also be installed in self supporting steel structures even outside a building. Special lifts can be designed for off-loading vehicles from multi level delivery trucks.
NOTES
- Machine Room Height 'M1 - 2430 Overhead ( 0.35m/s speed ) 'O' - 3950
- Pit Depth 'P' - 1650 Overhead (> 0.35 m/s speed) 'O' - 4600
- Any number of floors can be served. The Side elevation shows only the Top Floor &
- Bottom Floor for the respective height requirements
- All Door heights will be as per the table below. Door Lintel Bottom should be at plus
- 150mm above the clear height mentioned in the table.
- Two side open doors are possible at ground floor at the same or different level.
- Plan for Manual Swing doors / Telescopic doors are different.
- All Sizes are inside finished dimensions in mm.
- All Hoist way walls are 230 mm thick Brick or 150 mm RCC walls.
For further details or requirements, Email us or send Enquiry
Posted in: 
